Cart 0
Aquadyne's compatible Filter Service Kit for Bluestar Opulus RO+UV+UF+Copper Water Purifier

Aquadyne's compatible Filter Service Kit for Bluestar Opulus RO+UV+UF+Copper Water Purifier

Rs. 3,600.00
Share Share

This kit contains the following items:

  1. Pre Filter Spun Cartridge 10 Inch (1 Nos): This is 5 Micron Spun Cartridge for Pre Filter Bowl fitted outside the RO Water Purifier System.
  2. Carbon Filter 8.5 Inch (1 Nos): These filters contain premium grade coconut based granular activated carbon, 1200 - 1400 IV (Iodine Value) which absorbs chlorine molecules & other harmful chemicals from the supply water and improves taste.
  3. Sediment Filter 8.5 Inch (1 Nos): This filter contains premium grade 8 inch polypropylene fabric filter which absorbs micro sediment particles from feed water and reduces the turbidity.
  4. Spin Welded Reverse Osmosis Membrane 75 GPD 10.5 Inch (1 Nos): This thin film composite (TFC) is a semi-permeable membrane and when water is pressed upon it with high pressure of RO Pump, it separates the harmful chemicals, heavy elements and supply purified water through one outlet and discharge waste water through another outlet. Aquadyne RO Membrane is factory integrated/sealed so that consumer can easily replace the same in his purifier.
  5. Alkaline Cartridge with Copper Enrichment SS 6.5 Inch (1 Nos): This filter contains alkaline mineral balls enriched with essential minerals. This filter is installed after the RO Membrane Filter & it enriches the water with essential minerals for good health. This filter further makes the drinking water basic in nature i.e. increases its pH value over 7.0
  6. Ultra Filtration (UF) Membrane 8.5 Inch (1 Nos): This UF Membrane filter of micro-scale pore size (0.01-0.1um) and removes residual impurities from water to produce potable water & has selective function of filtering Micro Organism such as Algae, Bacteria, Fungi, Cyst etc.
  7. Ultraviolet Tube Lamp 4W (Philips/Osram): This Lamp will emit UV light which will mutate the DNA of micro-organisms and inhibit their growth potential.
  8. Push type Quick Fit Elbows (11 Nos): These Fittings are provided in this Kit to enable the customer to replace the filters in his Faber galaxy plus purifier himself without any hassle.
  9. Flow Restrictor (1 Nos): This is to be used/fitted with RO Membrane at its waste port.
  10. Pipe Tube (3 metres): This is provided to enable any alteration in flow sequence.
  11. Installation Instructions
    • Made from certified IS Grade Food Grade material
    • Quick Fit Type Inline Filter Kit with  which customer can install himself using aid of installation instructions without technicians help.
    • For any questions or clarification kindly contact on 09728755877 or write to help@aquadyne.in
    • This Filter sets displayed herein are neither manufactured by Bluestar nor endorsed by Bluestar. The word Bluestar is used here for identification that the offered filter kit is compatible with the mentioned model. The word Bluestar is used under Section 30(2)(d) of Indian Trademarks Act, 1999 of permissible fair use to indicate that filter cartridges are so adapted to the relevant model of Bluestar water purifiers.

    Disclaimer: Due to regular up gradation in product offering for the benefit of customers, the supply products may vary from the images shown.

    Share this Product

    More from this collection